buggsy97

How I did it: First, i cut the sheet silver to make the camper and door. then i pierced the windows with a drill press, and sawed and filed them to shape. the wheel is made from a hammered piece of granulated silver, the tow bar is square wire. I sweat-soldered them all on with hard solder and a propane/oxygen torch, then soldered a bail on the back, handmade from square wire. the tire is blackened with liver of sulphur, and burnished at the rim. Read how I did it…

How I did it: I brushed my teeth thoroughly, then rinsed with Listerine. I also washed my hands thoroughly with antibacterial soap.  I had purchased a sterilized piercing needle from a piercing shop, which i used for the procedure. Then i lifted up my tongue, and pressed the needle through the soft area under the ligament. Then, i inserted the barbell end into the hole in the needle, and slid it back through the hole. My friend had to screw the en… Read how I did it…