inventory -- Toshiba Satellite Pro 440CDX
19 months ago
inventory
- Processors: 1 Intel Pentium, 132 Mhz, no cache
- Memory: 48.0 MB RAM
- Storage Devices: (bootable) CD-ROM, hard disk, USB jump drive, no floppy drive
- Toshiba CD-ROM XM-1502BN, Firmware revision: 1001
- Generic IDE DISK TYPE01: Standard IDE/ESDI Hard Disk Controller
* Input/Output Range: 01F0 – 01F7
* Input/Output Range: 03F6 – 03F6
* Interrupt Request: 14
* C:
* Label: TOSHIBA440
* File system: FAT
* Used space: 1,132,036,096 bytes (1.05GB)
* Free space: 310,738,944 bytes (296 MB)
* Capacity: 1,442,775,040 bytes (1.34GB)- Standard IDE/ESDI Hard Disk Controller
- Input/Output Range: 0170 – 0177
- Input/Output Range: 0376 – 0377
- Interrupt Request: 15
- Generic NEC FLOPPY DISK
* Standard Floppy Disk Controller
* Input/Output Range: 03F2 – 03F5
* Input/Output Range: 03F7 – 03F7
* Interrupt Request: 06
* Direct Memory Access: 02
- Chips and Technology 65554 PCI
* Hardware version: 194
* Memory Range: 000A0000 – 000AFFFF
* Memory Range: 000B0000 – 000BFFFF
* Input/Output Range: 03B0 – 03BB
* Input/Output Range: 03C0 – 03DF
* Memory Range: FE000000 – FEFFFFFF
* Memory Range: 000E4000 – 000EDBFF
* Memory Range: 03040000 – 0307FFFF
* Features: DirectDraw 1.00
* 800×600 64K Colors (43h)
* ? (60Hz)
- Plug and Play Monitor
- Standard 101/102-Key or Microsoft Natural Keyboard
* Input/Output Range: 0060 – 0060
* Input/Output Range: 0064 – 0064
* Interrupt Request: 01
- WheelMouseIM (PS/2)
* Manufacturer: Toshiba
* Driver: Logitech
* Interrupt Request: 12
* Labtec Wheel Mouse
- Network Adaptors
* Instant Wireless – Network PC CARD
* Input/Output Range: 0240 – 027F
* Interrupt Request: 09
* Toshiba FIR Port Type-U
* Input/Output Range: 02F8 – 02FF
* Interrupt Request: 10
* Input/Output Range: 0300 – 030F
* Interrupt Request: 07
- PCMCIA socket
* PCIC or compatible PCMCIA controller
* Input/Output Range: 03E0 – 03E1
* PCMCIA Card Services
* Setting based on: Basic configuration 0000
* Memory Range: 000D6000 – 000D6FFF
- Infrared Communication Device
- Infrared Communication Device
- Modem
* Parallel cable on LPT1
* ECP Printer Port (LPT1)
* Use flow control: Hardware (RTS/CTS)- Parallel cable on LPT3
- Virtual Infrared Printer Port (LPT1)
* Use flow control: Hardware (RTS/CTS)
- Serial cable on COM1
* Communications Port (COM1)
* Maximum speed: 19200
* Data bits: 8
* Parity: None
* Stop bits: 1
* Port Settings: Use FIFO buffers (requires 16550 compatible UART)
* Receive Buffer: Low (1) I-I-V-I High (14)
* Transmit Buffer: Low (1) I-I-I-V High (16)
* Use flow control: Hardware (RTS/CTS)
- Serial cable on COM4
* Virtual Infrared COM Port
* Maximum speed: 19200
* Data bits: 8
* Parity: None
* Stop bits: 1
* Port Settings: Use FIFO buffers (requires 16550 compatible UART)
* Receive Buffer: Low (1) I-I-V-I High (14)
* Transmit Buffer: Low (1) I-I-I-V High (16)
* Use flow control: Hardware (RTS/CTS)
- Ports (COM & LPT)
* Communications Port (COM1)
* Input/Output Range: 03F8 – 03FF
* Interrupt Request: 04
* Bits per second: 19200
* Data bits: 8
* Parity: None
* Stop bits: 1
* Flow control: Xon/Xoff
* Port Settings: Use FIFO buffers (requires 16550 compatible UART)
* Receive Buffer: Low (1) I-I-V-I High (14)
* Transmit Buffer: Low (1) I-I-I-V High (16)
* ECP Printer Port (LPT1)
* Input/Output Range: 0378 – 037A
* Input/Output Range: 0778 – 077A
* Interrupt Request: 07
* Direct Memory Access: 03
* Virtual Infrared COM Port
* Virtual Infrared LPT Port
- YAMAHA OPL3-SAx WDM Driver
* Input/Output Range: 0220 – 022F
* Input/Output Range: 0530 – 0537
* Input/Output Range: 0388 – 038B
* Input/Output Range: 0330 – 0331
* Input/Output Range: 0370 – 0371
* Interrupt Request: 05
* Direct Memory Access: 01
* Direct Memory Access: 00
- Universal Serial Bus Controllers
* NEC USB Open Host Controller (E5-E11)
* Bandardwidth consuming devices:
* System reserved: 10%
* Interrupt Request: 11
* Memory Range: FDFFF000 – FDFFFFFF
* USB Root Hub
* Power:
* The hub is self powered.
* Total power available: 500mA per port
* Devices on this Hub
* 2 port(s) available.: 0mA
- System Devices
- Advanced Power Management support
* APM version: 1.2 - APM Battery Slot
- APM Battery Slot
- Composite Power Source
- Direct Memory Access Controller
* Input/Output Range: 0000 – 000F
* Input/Output Range: 0081 – 0083
* Input/Output Range: 0087 – 0087
* Input/Output Range: 0089 – 008B
* Input/Output Range: 008F – 008F
* Input/Output Range: 00C0 – 00DF
* Direct Memory Access: 04 - Motherboard resources
* Input/Output Range: 0080 – 0080
* Input/Output Range: 0084 – 0086
* Input/Output Range: 0088 – 0088
* Input/Output Range: 008C – 008E
* Input/Output Range: 00E0 – 00EF
* Input/Output Range: 00B0 – 00B2
* Input/Output Range: 0024 – 0025
* Input/Output Range: 002E – 002F
* Input/Output Range: 1882 – 1885
* Input/Output Range: 1888 – 188D
* Input/Output Range: 0480 – 048F
* Input/Output Range: 0CF8 – 0CFF
* Input/Output Range: 04D0 – 04D1 - Numeric data processor
* Always use the numeric data processor
* Input/Output Range: 00F0 – 00FF
* Interrupt Request: 13 - PCI bus
* Device enumeration: Use Hardware
* IRQ Steering
* Use IRQ Steering: Yes
* Get IRQ table using ACPI BIOS: Yes
* Get IRQ table using MS Specification table: Yes
* Get IRQ table from Protected Mode PCIBIOS 2.1 call: No
* Get IRQ table from Real Mode PCIBIOS 2.1 call: Yes - Plug and Play BIOS
* Disable NVRAM / ESCD updates: No - Processor Support
- Programmable Interrupt Controller
* Input/Output Range: 0020 – 0021
* Input/Output Range: 00A0 – 00A1
* Interrupt Request: 02 - System Board
- System board extension for PnP BIOS
* Memory Range: 00000000 – 0009FFFF
* Memory Range: 000F0000 – 000FFFFF
* Memory Range: 00100000 – 0301FFFF
* Memory Range: FFF00000 – FFFFFFFF - System CMOS/real time clock
* Input/Output: 0070 – 0071
* Interrupt Request: 08 - System speaker
* Input/Output: 0061 – 0061 - System timer
* Input/Output: 0040 – 0043
* Interrupt Request: 00 - Toshiba CPU to PCI bridge
* Manufacturer: Toshiba
* Hardware version: 039
- startup notes:
* Toshiba Video BIOS 2.10
* Press ESC to enter BIOS. (then press F1)
* BIOS version = 6.90
- the PCMCIA network card is a Linksys WPC11 (probably version 1)
